原装进口/铁氟龙PTFE美国苏威D2510F耐化学性耐热

使用微信扫描二维码分享朋友圈，成交更快更简单！

Algoflon® D 2510 F
聚四氟(PTFE)
Solvay Specialty Polymers


数据表
PDF(中文)
PDF(英语)
UL 黄卡
购买地点

产品说明： 　

Algoflon® D 2510 F是一种聚四氟 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。

Algoflon® D 2510 F的主要特性有:

耐化学品
耐热

Algoflon® D 2510 F的典型应用领域为:涂覆应用
总体
材料状态 已商用：当前有效

供货地区 北美洲
欧洲
亚太地区


特性 低摩擦系数
耐化学性良好
耐热性高


用途 浸渍应用
涂敷应用


外观 白色

形式 Latex

物理性能 额定值 单位制 测试方法
pH值 > 9.00 ASTM D4441
密度 1.51 g/m³ ASTM D4441
平均颗粒尺寸 240 nm 内部方法

充模分析 额定值 单位制 测试方法
布络克菲尔德粘度 - (20°) 25 mPa·s
补充信息 额定值 单位制 测试方法
Non Ionic Surfactant - (on the mixture) 3.0 wt% ASTM D4441
PTFE Content - (on the mixture) 60.0 wt% ASTM D4441
Processing

Algoflon® D 2510 F is processed according to methods generally used for conventional impregnation technology. Generally the procedure involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering above the crystalline melting point of the coated resin may be carried out to obtain the finished coated articles. Multiple passes may be required to obtain the desired PTFE load and coating thickness.
Algoflon® D 2510 F can be processed neat or appropriately formulated. Also, it can be used diluted using distilled or deionized water. Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates.

Storage and Handling

Algoflon® PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to avoid contamination, it is recommended to keep the containers closed when not in use.

Safety and Toxicology

Before using Algoflon® PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes.
See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

Algoflon® D 2510 F is packaged in either 30 kg drums or 1500 kg IBC's.

Additional Technical Information

For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative, or contact us by e-mail.