PTFE美国苏威S121铁氟龙高拉伸强度压缩模塑高流动

使用微信扫描二维码分享朋友圈，成交更快更简单！

PTFE美国苏威S121铁氟龙高拉伸强度压缩模塑高流动

PTFE美国苏威S 121 铁氟龙 高拉伸强度 压缩模塑 高流动
Algoflon® S 121
聚四氟 (PTFE)
Solvay Specialty Polymers

数据表
PDF(中文)
PDF(英语)
UL 黄卡
购买地点

产品说明： 　


Algoflon® S 121是一种聚四氟 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,加工方式为:isostatic molding或压缩模塑。 Algoflon® S 121的主要特性为:高强度。

典型应用领域包括:

添加剂/色母粒
食品接触应用
总体
材料状态 已商用：当前有效

供货地区 北美洲
欧洲
亚太地区


特性 高拉伸强度
良好的流动性


用途 添加剂
混合


机构评级 FDA 21 CFR 177.1550

外观 白色

形式 粉状

加工方法 Isostatic Molding
压缩模塑


物理性能 额定值 单位制 测试方法
比重 2.17 ASTM D792
Bulk Density 810 g/l ASTM D4894
平均颗粒尺寸 550 µm 内部方法
收缩性 - Radial 2.7 % ASTM D4894

机械性能 额定值 单位制 测试方法
Elongation at Break 340 %
Tensile Strength 37.0 MPa ASTM D4894

补充信息
Processing

Algoflon S 121 is processed according to methods used for normal and isostatic molding. In particular isostatic molding technology uses hydrostatic pressure on a diaphragm positioned over or around the object to be preformed. Prior to use, the powder must be conditioned above 19°C / 66°F.
The molding process involves typically two steps: preforming and sintering. Initially the powder is compacted into a preform. This is then sintered using precise sintering (heating and cooling) cycle to take the temperature above the PTFE crystalline melting point to attain the final article. The preforming pressure, dwell time at maximum sintering temperature and cooling rate are all established according to the shape and size of the final item.
Algoflon S 121 is specially reccommended for isostatic molding since it shows good flowability to fill completely complex or narrow molds. Furthermore it provides smooth surface finishing.

Storage and Handling

Algoflon PTFE free flowing powders must be stored and handled carefully to achieve defect free molding. Preforming is most effective when the powder temperature is uniformly above 19°C / 66°F (between 21-27°C / 70-81°F). Below this temperature the powder is difficult to mold without cracks. Temperatures that are too high should also be avoided to prevent powder lumping and poor flow.
Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.

Safety and Toxicology

Before using Algoflon PTFE Free Flowing Powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapour extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.
Do not smoke in areas contaminated with powder, vapour or fumes.
See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

Algoflon S 121 is packaged in 45 kg nonreturnable drums. Each drum contains one bag liner made of polyethylene resin.

Additional Technical Information

For Material Safety Data Sheet or additional technical information consult your Solvay sales representative or the website: